Fabrication of BSCF-based mixed oxide ionic-electronic conducting multi-layered membrane by sequential electrophoretic deposition process

The Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF)-based multi-layered oxygen separation membrane was fabricated by the sequential electrophoretic deposition (EPD) process. A thin porous/dense bi-layer of BSCF was formed on a thick porous support of BSCF. The porous support prepared by a sacrificial template method using BSCF powder mixed with wheat starch (30 wt%) as a pore-forming agent, followed by uniaxial pressing and low-temperature sintering, was directly used as an EPD electrode. A thin BSCF layer was first formed on the porous support, and then a thin BSCF + PMMA (polymethyl methacrylate) layer was sequentially formed on the thin BSCF layer using a bimodal suspension of BSCF and PMMA. A 30-μm thin porous/dense bi-layer of BSCF of which the total thickness was obtained by optimizing the processes of EPD and subsequent co-sintering. The oxygen separation performance of 3.7 ml (STP) min^?1 cm^?2 at 860 °C was achieved for the BSCF-based multi-layered oxygen separation membrane.     

Constructing magnetically recoverable CdS/CaFe2O4 P–N heterojunctions for enhanced photoelectrochemical properties towards H2 evolution reaction

A novel CdS/CaFe₂O₄ (CS/CFO) heterogeneous p-n junction was created by thermal deposition of CaFe₂O₄ nanoparticles on CdS rods. The CS/CFO hetero-structured photocatalysts exhibited increasingly efficient visible light harvesting compared to the bare CdS. The CS/CFO composites also presented higher photocurrent and slower decay of photoluminescence, suggesting a better separation of the photo-generated electrons and holes. The photocatalytic H₂ evolution quantity on the optimized CS/CFO composite from water in the presence of ethanol was up to 2200 μmol after 3-h visible light illumination, which is more than twice that of the pristine CdS. The chemical interaction between CdS and CaFe₂O₄ was confirmed by the shifts in the XPS peaks, which made it possible for the charge carriers to transfer across the p-n junction interface. This research highlights the importance of forming an interfacial p-n heterojunction between two semiconductors for efficient charge separation and improved photocatalytic performance.     

Design,simulation, elaboration and luminescence of Tb3+-doped Ba0.84Gd0.16F2.16 fluoroaluminosilicate scintillating glass ceramics

Extensive researches on scintillators have been executed to satisfy the excellent radiation detection materials in broad applications. However, practical application of conventional scintillators is limited due to the limitations of high cost, time-consuming fabrication process and insufficient radioluminescence. Herein, high density precursor glass doped with Tb³⁺ was designed to absorb X-ray efficiently and produce green emission. Molecular dynamics simulation was used to simulate the phase separation process in melting process. Then, Tb³⁺-doped Ba_0.84Gd_0.16F_2.16 glass ceramics (GCs) with excellent structural and optical properties were elaborated by melt quenching technic and further heat treating. Their structural properties, photoluminescence (PL) and X-ray excited luminescence (XEL) were explored detailedly. The internal quantum efficiency of PL is 64 % in GCs. The XEL intensity is 192 % of that of Bi₄Ge₃O₁₂ (BGO) commercial scintillator. Our results suggest that Ba_0.84Gd_0.16F_2.16:Tb³⁺ GCs might have potential application in X-ray detection.     

Cross-linked anion exchange membranes with flexible,long-chain,bis-imidazolium cation cross-linker

Herein, poly (phenylene) oxide (PPO)-based cross-linked anion exchange membranes (AEMs) with flexible, long-chain, bis-imidazolium cation cross-linkers are designed and synthesized. Although the cross-linked membranes possess high ion exchange capacity (IEC) values of up to 3.51–3.94 meq g⁻¹, they have a low swelling degree and good mechanical strength because of their cross-linked structure. Though the membranes with the longest flexible bis-imidazolium cation cross-linker (BMImH-PPO) possess the lowest IEC among these PPO-based AEMs, they show the highest conductivity (24.10 mS cm⁻¹ at 20 °C) and highest power density (325.7 mW cm⁻² at 60 °C) because of the wide hydrophilic/hydrophobic microphase separation in the membranes that promote the construction of ion transport channels, as confirmed by atom force microscope (AFM) images and the small angle X-ray scattering (SAXS) analyses. Furthermore, the BMImH-PPO samples exhibit good chemical stability (10% and 6% decrease in IEC and conductivity, respectively, in 2 M KOH at 80 °C for 480 h, and a 22% decrease in weight in Fenton's reagent at 60 °C for 120 h), making such cross-linked AEMs potentially applicable in alkaline anion exchange membrane fuel cells.     

来瓦希尔骨架材料MIL-53(Al)填充PEBA膜渗透汽化分离水中苯胺

将来瓦希尔骨架材料MIL-53(Al)引入到聚醚共聚酰胺（PEBA-2533）高分子相中制备了不同填充量的PEBA/MIL-53(Al)杂化膜并用于渗透汽化分离水中微量苯胺。X-射线衍射结果证实MIL-53(Al)被成功合成。扫描电镜和激光粒度分析结果表明所制备MIL-53(Al)颗粒粒径在纳米尺度范围内。采用扫描电镜、红外光谱、X-射线衍射、差示扫描量热和水接触角对杂化膜进行了表征，并考察了杂化膜的溶胀行为和分离性能。结果表明，所得杂化膜的热稳定性较好。当MIL-53(Al)质量分数小于20%时，MIL-53(Al)在高分子相中分散均匀，继续增大填充量出现团聚现象。杂化膜的结晶度随MIL-53(Al)填充量的增加而降低。MIL-53(Al)的引入增强了杂化膜的疏水性和溶胀度。在料液温度为60℃、膜下游压力400Pa、料液苯胺质量分数为3.6%时，MIL-53(Al)质量分数为20%的杂化膜（M-20）综合分离性能最优，渗透通量达到2.15kg/(m²·h)，分离因子为264。12天的稳定性测试结果表明所得杂化膜分离性能无显著变化，能够满足渗透汽化应用要求。     

Development and performance test of a miniature movable mixed-refrigerant liquid nitrogen generator

In order to cover long-term but small quantity liquid nitrogen requirements of laboratory or field users, a miniature movable mixed-refrigerant liquid nitrogen generator (MRLN) was developed and tested here, based on a precooled mixed-refrigerant J-T (MRJT) refrigerator. With the full air-cooled, skid-mounted structure, this MRLN was built utilizing off-the-shelf refrigeration components like commercial single-stage oil-lubricated compressors to reduce construction cost greatly. Bottled pure N₂, pressure swing adsorption (PSA) unit and mini cryogenic rectification column could be employed to supply N₂ in different operation modes respectively. In pure N₂ mode, N₂ was directly liquefied by the MRJT refrigerator. With feed N₂ at 0.8 MPa, the specific power consumption (SPC) was 1.79 kWh L⁻¹, and figure of merit (FOM) was 6.27%. The estimated SPC in PSA mode was 2.68 kWh L⁻¹. For column mode, the SPC was 4.59 kWh L⁻¹, with FOM of 3.38%. A closed N₂ cycle could convey cooling capacity between flammable refrigerant and air. This MRLN could be a convenient and low-costing choice for some liquid nitrogen users.     

High‐performance printable paper‐like composites derived from plastic flexible film wastes

Owing to lack of proper recycling methods, plastic flexible film wastes are usually directly discarded or incinerated, which brings about severe environmental pollution. Therefore, converting plastic wastes into value‐added products has received more and more attention in recent years. In this work, paper‐like composites derived from plastic flexible film wastes were prepared via the thermally induced phase separation method by adding polyethylene‐graft‐maleic anhydride (PE‐g‐MAH) as a compatibilizer and fumed silica as an additive. The resulting paper‐like composites were characterized by SEM and infrared spectroscopy. Other properties such as mechanical properties, thermal properties, whiteness, printability and adsorption performance were also tested in detail. It was found that remarkable enhancements in mechanical, thermal and printable properties of the paper‐like composites were obtained when nano‐SiO₂ loading was 2.5–3 wt%. Uniformly distributed holes that can endow good printability by providing space for ink or other functional molecules were observed by using SEM. Furthermore, the CIE whiteness value of the resulting composites can reach 91.6%–96.7% on adding nano‐SiO₂. Additionally, the paper‐like composites integrating nano‐SiO₂ and PE‐g‐MAH exhibited good solid ink affinity and high water or oil adsorption capacity. Thus, according to this research, high‐performance printable paper‐like composites used as major components of multifunctional papers can be prepared based on plastic flexible film wastes. © 2019 Society of Chemical Industry     

氧化石墨烯杂化分子印迹复合膜制备及性能研究

采用改进的Hummers法，通过冷冻干燥制备了氧化石墨烯(GO)。以辛弗林盐酸盐为模板分子，水溶性的丙烯酰胺为功能单体，离子液体(溴代1-丁基-3-甲基咪唑)为致孔剂，把GO加入聚合液中，制备了GO杂化的分子印迹复合膜(GO-MIM)。利用透射电镜、扫描电镜、X射线衍射和红外光谱等方法对GO及GO-MIM进行了表征。通过将分子印迹膜技术与GO相结合，明显提高了分子印迹膜的力学性能。吸附及渗透实验表明，GO-MIM可在纯水溶剂体系，对辛弗林盐酸盐具有很好的选择性吸附能力和优先透过能力，体现了明显的分子印迹效果。     

溶胀嵌入脂肪酸分子制备高脱硼反渗透膜

采用“溶胀-嵌入-收缩”方法改性聚酰胺反渗透膜，制备了一种高脱硼反渗透膜。通过甲醇溶胀增加了高分子链之间的距离，为疏水性癸酸分子的嵌入提供了场所，然后在压力和浓差极化共同作用下，改性分子选择性嵌入聚酰胺膜的孔内；当甲醇分子离开后，聚酰胺膜收缩将癸酸分子固定在高分子网络中。实验借助溶胀和分子嵌入以及溶胀后的收缩调节聚酰胺膜的孔径大小；利用脂肪酸的疏水性降低聚酰胺膜的极性，从而实现增加空间位阻和减少氢键结合位点数量的目的。实验结果显示，改性膜的脱硼率和截盐率均明显升高，截盐率从90.36%增加到96.46%，脱硼率从未改性膜的47.85%增加到77.32%，渗透液的硼含量达到WTO的使用标准。虽然水和硼的渗透性均下降，但是水和硼的渗透选择性增加，证明该方法有利于提高水硼选择性。